Spanish Warranty

11
10
Cut the non-adhesive foam strip to the proper length
and insert it between the upper window sash and
the lower window sash.
Foam Strip
(Not adhesive
backed)
11
Attach the window locking bracket with a type C
screw.
Window Locking Bracket
12
Before installing the front grille, fold out the vent
control lever located to the left of the control panel
as shown.
13
Cut the adhesive-backed heatproof foam to match
the size of the curtain panels. Remove the backing
from the heatproof foam and attach it to the curtain
panels.
Heatproof foam
NOTE:
The heatproof foam improves the cooling
capability of the air conditioner.
INSTALLATION INSTRUCTIONS
14
Connect the wire harness from the front grille
assembly to the air conditioner.
15
Attach the front grille assembly to the cabinet by
inserting the grille tabs into the slots on the front
of the cabinet. Push the grille in until it snaps into
place.
NOTE:
Carefully guide the vent control lever through
the grille as you push the grille in.
16
Open the air inlet grille and secure the front grille
assembly with 1 type A screw through the bottom of
the front grille. (There are 2 type A screws packed
in a small bag. Use one and store one as a spare.)
The window installation of the room air conditioner
is now complete. See the Electrical Data section for
information on attaching the power cord to an electrical
outlet.