Installation guide

Installation Instructions
[-_ DETERMINING WALL PLATE LOCATION UNDER YOUR CABINET
Plate position - beneath flat bottom
cabinet
Plate position - beneath framed recessed
cabinet bottom
MountingPlateTabs
the CabinetBottom
L
At least 30", upto 36"
MountingPlateTabs
TouchingtheBack
Frame
L
II
30"toCooktop
t
Plate position - beneath recessed bottom
cabinet with front overhang
MountingPlatewith
TabsBelowCabinet
Bottomthe Same
Distanceas the Front
gDepth
L
I II
30"to C9oktop
f
Your cabinets may have decorative uam that interferes
with the oven installation. Remove the decorative trim
to install the oven properly and to make it level.
THE OVEN MUST BE LEVEL.
Use a level to make sure the cabinet bottom is level.
If the cabinets have a front overhang only, with no
back or side frame, install the mounting plate down
the same distance as the front overhang depth. This
will keep the oven level.
[] Measure the inside depth of the front overhang.
[] Draw a horizontal line on the back wall an equal
distance below the cabinet bottom as the inside
depth of the front overhang.
[] For this type ofinstallauon with front overhang only,
align the mounting tabs with this horizontal line, not
touching the cabinet bottom as described in Step D,
9