Installation guide

Installation Instructions

MOUNT THE OVEN

(continued)

[_] Insert a seK-'aligning screw tbrougta top center cabinet

hole. Temporarily secure the oven by turning the

screw at least two full turns after the threads have

engaged. (It will be completely tightened later.) Be

sure to keep power cord fight. Be careful not to pinch

the cord, espedally when mounting flush to bottom

of cabinet.

CabinetFront

r__.._Cebinet BottomShelf

I',I,M_ FillerBlock

___._ofCabinetRecess

OvenTop

[4]Attach the oven to the top cabinet.

[] insert 2 self-aligning screws through

outer top cabinet holes. Turn two full

turns on each screw.

_] Tighten center

screw completely.

[_]Tighten the outer two screws to the top of the

oven. (While tightening screws, hold the oven

in place against the wall and the top cabinet.)

[_]Install grease filters. See the Use & Care Guide

packed with the oven.

ADJUST THE EXHAUST

ADAPTER

Open tile top cabinet and adjust tile exhaust adapter

to connect to the house duct.

Damper

BackofOven

CONNECTING DUCTWORK

HouseDuct

[_] Extend the house duct down to connect to the

exhaust adapter.

[] Seal exhaust duct joints using duct tape.