Manual

I, Remove all components from the carton

2 Attach the Motor Bracket on the outside of the right grill bowl panel Align the two holes of the

Bracket with the holes on the grill bowl Tighten securely using two Screws #t0-24x314" UNC, Plain

Washers and Nuts provided

'}jIIllllltIlltlllIl'!

Rotisserie Screw #i0-24x3f4" #10-24Nut

Qty, 2 \_

Part # $I!2G10124

Rotisserie Washer

Qty 2

Part # $4 t tG03084

/>;"

. _. *. %. • ::v .i

Rotisserie Nut #t0-24 /

Qty, 2 Motor Bracket

Part # $362G10124

Outside of Right Grill Bowl Panel

Rotisserie Screw #10-24X_"UNC

with washers and nuts

Slide the Spit through the piece of meat or poultry and the Holding Forks onto each end of the Rotisserie

Spit Adjust spacing between Holding Forks to accommodate your food, then tighten the Thumbscrews

to keep the Holding Forks in position Slide the Collar onto the threaded end of the Spit Do not

tighten the Collar Thumbscrew until the Rotisserie is placed into your grill

spi!

Holding Forks .....,.........

Thumbscrew

t/4"x !/2" Thumbscrew

I/4"x 1t2"

Rotisserie Thumbscrew 114"x112"

Qty, 3

Part # $I96G04084

Collar