Manual

I_"t 4'__1_I D][or__l:| 4n nl__"i II:| I_q lln(o] _[_
Grill Lighting Instructions
Main Burner Lighting
1. Before each use, check all hoses for cracks,
nicks, cuts, or abrasions. If a hose is
damaged in any way, do not use your grill
before replacing the hose with an authorized
part from the Parts List. Also make sure all
gas supply connections are securely
tightened.
2. Familiarize yourself with the Safety and Use
and Care instructions in this manual. Do not
smoke while lighting the grill or checking gas
supply connections.
3. Be sure the LP gas tank has gas.
4. Open the grill lid.
Side Burner
Searing Burner
Rotisserie Burner
Main Burner
Side Burner, Rotisserie Burner, and
Searing Burner Lighting Instructions
Failure to replace a faulty hose, secure gas
supply connections, or to open the lid before
proceeding to the Lighting Procedures could
result in a fire or explosion that could cause
serious bodily injury, death, or property damage.
Set control knobs to OFF and open the LP
gas tank valve SLOWLY or turn on the NG
gas.
O
Low
6. Push and turn any control knob to Hi
7,
8,
O
Low
Once one burner is lit, the adjacent burner
can be lit by turning its control knob to Hi.
When lit, turn the control knob to its desired
setting.
1. Follow steps 1 through 4 of the Grill Lighting
Instructions.
2. Open the grill lid or side burner cover.
3. Set control knobs to OFF and open the LP
gas tank valve SLOWLY or turn on the NG
gas.
4. Push and turn the appropriate burner control
knob to "Hi".
Continue to press in and hold the rotisserie
or searing burner control knob for 5 to 7
seconds once lit to activate the safety flame
sensor. Failure to do so will cause gas to be
shut off to the back burner and the burner
will go out.
6,
If the burner does not light within 5 seconds,
turn the burner control knob to "Off". Wait 5
minutes for the gas to clear, and repeat the
above procedure.
]9