Manual

install Towel Bar Handle and Utensil Hooks
[] Remove 2 Philips head screws from the left side of the Countertop Frame. Use them to attach a
Towel Bar Handle to the left side of the Countertop Frame.
[] Remove 2 Philips head screws from the right side of the Countertop Frame. Slide 3 Utensil Hooks
onto the second Towel Bar Handle and use the screws to attach it to the right side of the Countertop
Frame.
Place LP Cylinder into the Cabinet (LP Model Only)
[] Unlock cylinder tray by turning the locking clip located on the front left corner. Pull the cylinder tray
out from the cabinet. Place the LP cylinder down into the tank support hole. Ensure the valve faces
towards the left. Raise the LP cylinder support ring and unhook as shown as you push the cylinder
tray back into the cabinet, Lock the cylinder tray in place by turning the locking clip, and lower the LP
cylinder support ring over the top of the LP cylinder. Wrap around the neck of the cylinder and
re-hook to secure the LP cylinder in place,
Do Not Hook Up the LP Cylinder to the Regulator Assembly at this time,
1!