Manual

Assemble the Rotisserie Spit Assembly
[] Slide one Washer onto the end of the Rotisserie Spit, followed by the Counterweight, and the second
Washer. Tighten the washers to secure the Counterweight. See Inset 1. Slide the Spit
Bushing on the spit followed by the 2 Meat Forks as shown in Inset 2. Tighten the thumbscrews on
the Meat Forks. Use caution as the forks are sharp.
Inset 1
,\
Inset 2
Install Rotisserie Spit Assembly into the firebox
[] Slide the Rotisserie Spit Assembly into place by inserting the pointed end into the Rotisserie Motor, as
shown in Inset 1. Place the bushing into its bracket on the left firebox side panel. See Inset 2.
Note: We recommend you store the Counterweight and Forks in the Cabinet when not in use. A holder
is located on the back of the firebox for Rotisserie Spit storage.
[] The Warming Rack must be removed when installing the Rotisserie Spit.
Inset 2
Inset I
I0