Product Manual

Step 2 - ALL SERIES
Step 7 - ALL SERIES
Step 8
Step 6
Step 9
Step 10
Step 11
Step 12
Leveler(s)
*If you purchased the optional caster kit, install the casters
instead of the levelers.
Rotate
2 1/2” Bolt(s)
*You will need the 2 1/2” bolts
so they are long enough to go
into the vertical channels.
Channel Nut(s)
Back Plate
Leave Space
Upper Shelf Channel(s)
Adjust height and
tighten bolts.
Highest
Lowest
Left Upper
Shelf Support(s)
Right Upper
Shelf Support(s)
Channel Nut(s)
1 1/2” Bolt(s)
Note - the larger
hole(s) on the
shelf supports
face the outside.
- TIP -
The teeth of the channel
nut always face toward
the bolt.
This completes the assembly for the
300 SERIES & 400 SERIES!
For the 100 SERIES & 200 SERIES
continue to STEP 9.
- TIP -
100 SERIES & 200 SERIES
100 SERIES & 200 SERIES
100 SERIES & 200 SERIES
100 SERIES & 200 SERIES