Product Manual

Tools needed:
Step 1:
Philips head
Screwdriver
or Drill
Crescent Wrench or
3/8” Box Wrench
What’s in the box?
QTY 2: Main Frames
(Idencal frames:
Either can be used as
the top or boom.)
QTY 2: Rails
QTY 25: Rack Screws
Select your boom frame. Place rail on the inside corner
of the frame and align it so the tapped holes face the
front. Secure in place with two acorn nuts.
Step 2:
Screw (or drill) two rack screws into the rail at the boom.
Place the second frame on top and secure with two acorn nuts.
Then secure the rail by installing two rack screws at the top.
QTY 8: Acorn Nuts
Step 3:
When one side is complete with the top frame in place,
slide in the second rail and secure with two acorn nuts.
You may nd it easiest to fasten from boom to top.
Step 4:
Repeat step 2 to screw (or drill) two rack screws into both the
top and boom of the rail.
Rack is now ready to be installed at 16” on center.
When top and boom are in place.