User guide

Page 10
Initial Set-up Program Pr.21 (Flow Measurement Units)
This program is only available if you selected Flow in Program 24. This is where you select either Gallons per Minute or
Cubic Meters per Hour (m
3
).
Press / Action Display Description
Pr.2
Pr.2Pr.2
Pr.21
11
1
Program #21
or
6Pnn, nn3
6Pnn, nn36Pnn, nn3
6Pnn, nn3
Cycle between Gallons per Minute (6Pnn) and
Cubic meters per Hour (mm3).
Accepting the new “Application Type” Value
After a brief time
Pr.2
Pr.2Pr.2
Pr.21
11
1
Initial Set-up Program Pr.20 (Level Measurement Units)
This is where you select either Feet or meters.
Press / Action Display Description
Pr.2
Pr.2Pr.2
Pr.20
00
0
Program #20
or
F, nn
F, nnF, nn
F, nn
Cycle between Feet (F) and meters (nn)
Accepting the new “Application Type” Value
After a brief time
Pr.2
Pr.2Pr.2
Pr.20
00
0
After accessing any of these Initial Set-up programs, it is recommended that you run program Pr.01 to reset the
transmitter. See the following section for directions on running Pr.01.