ATV BEAD BREAKER MODEL # 38620 ATV BEAD BREAKER For use on tires 4” to 12” CAUTION: Read Manual Completely and Carefully for Safe Operation Before Using This Tool.
#38620 A TV BEAK BREAKER Table of Contents Safety Precautions Page 2 Warranty Information Page 3 Replacement Parts and Illustration Page 3 Instructions for Operation Page 4 I M P O RTA N T S A F E T Y P R E C AUTIONS FOR C H A N G I N G TIRES READ ENTIRE SAFETY PRECAUTIONS AND INSTRUCTION MANUAL BEFORE CHANGING ANY TIRES WITH THIS UNIT. IMPROPER USE MAY LEAD TO TIRE DAMAGE OR COMPLETE DESTRUCTION OF THE BEAD BREAKER OR TIRE CHANGING MACHINE.
R eplacement Parts / Illustration Also available is an instructional video on Ken-Tool’s complete Small Tire Changing System, including the ATV Bead Breaker and other tools. To receive this instructional video, send a check or money order for $9.95 to: Ken-Tool Tire Changing Video 768 E. North Street P.O. Box 9320 Akron, OH 44305 Phone: 330-535-7177 W arranty Ken-Tool products are guaranteed for fitness and merchantability.
Bead Bre a ker Directions 1.) 2.) 3.) 4.) Mounting Collar All Thread Bottom Handle Black Grip Handle Remove valve core and place ATV tire and rim assembly on any sturdy, center-post, tire-changing machine (we recommend Ken-Tool 38600 or 38601 series). Center the tire and secure the rim to the tire-changing machine. Hold both handles of the ATV Bead Breaker in your left hand. With your right hand, lower the adjustable, mounting collar over the center-post of the tire-changing machine.
Once the toe is securely placed between the rim and bead, lower the handles to the horizontal position. At this point, the toe should still be between the rim and bead. and the guide should rest against the outer flange. With the handles and mounting collar in a horizontal position, lift the black handled grip as shown. Your LEFT hand should be placed on the bottom handle. DO NOT apply much pressure to the bottom handle.
