Manual

IronMan™ Er

onomic Wheel Liftin

Bar #34950

Instruction Manual

Part No. 34950-98

HUB SIDE DOWN

Insert spoon end into spoke

hole with curved side toward

the center of the wheel…

…until the tip touches the

floor.

Set foot on tire …

…and pull bar straight

toward you to raise the

assembly.

Stop assembly when it is

fully upright.

See Video Demo at www.kentool.com

768 E. North Street, Akron, Ohio 44305; Phone: 330-535-7177, Fax: 330-535-1345

Website: www.kentool.com E-Mail: sales@kentool.com

PAGE 1
Instruction Manual Part No. 34950-98 IronMan™ Ergonomic g Wheel Lifting g Bar #34950 HUB SIDE DOWN Insert spoon end into spoke hole with curved side toward the center of the wheel… …and pull bar straight toward you to raise the assembly. …until the tip touches the floor. Set foot on tire … Stop assembly when it is fully upright. See Video Demo at www.kentool.com 768 E. North Street, Akron, Ohio 44305; Phone: 330-535-7177, Fax: 330-535-1345 Website: www.kentool.com E-Mail: sales@kentool.
PAGE 2
Instruction Manual Part No. 34950-98 IronMan™ Ergonomic g Wheel Lifting g Bar #34950 HUB SIDE UP Insert knob end into lug hole on side of assembly closest to you… …and pull bar straight toward you to raise the assembly. …until the knob rests on the hub. Set foot on tire … Stop assembly when it is fully upright. WARNING TIRE CHANGING IS DANGEROUS! While servicing tires, always follow OSHA Reg. CFR1910.177.