AIR BLAST BEAD SEATER OWNER’S MANUAL MODEL # 31440 AIR BLAST BEAD SEATER For use on small tubeless tires, size 4 to 12”. CAUTION: Read Manual Completely and Carefully for Safe Operation Before Using This Tool.
#31440 AIR BLAST BEAD SEAT E R Table of Contents Safety Precautions Page 2 Warranty Information Page 3 Replacement Parts / Illustrations Page 3 Assembly Instructions Page 3 Instructions for Operation Page 4 I M P O RTA N T S A F E T Y P R E C AUTIONS FOR C H A N G I N G TIRES READ ENTIRE SAFETY PRECAUTIONS AND INSTRUCTION MANUAL BEFORE USING THIS UNIT. IMPROPER USE MAY LEAD TO TIRE DAMAGE.
R eplacement Parts / Illustration Also available is an instructional video on Ken-Tool’s complete Small Tire Changing System, including the Air Blast Bead Seater and other tools. To receive this instructional video, send a check or money order for $9.95 to: Ken-Tool Bead Seating Video 768 E. North Street P.O. Box 9320 Akron, OH 44305 Phone: 330-535-7177 W arranty Ken-Tool Products are guaranteed for fitness and merchantability.
Air Blast Bead Seating Instructions After the tire has been mounted onto the rim and the wheel has been placed onto a tire machine, straighten the bottom bead to lay flat on the rim. Remove the valve core. Lubricate the entire bead area before inflating the tire. (Ken-Tool recommends Bead-Eze.) Lubing the tire with a recommended lubricant helps to seal the bead to the rim flange. Attach the correct air hose with coupling (80 - 150 psi) to the 1/4” quick disconnect fitting.
