Operation Manual

X8 MIG WELDER 2.4 Operation
2.4.1.3 Gun remote control
With the remote control, you can select memory channels and WPSs, and adjust wire feed speed, fine tuning
and dynamics.
2 1
2
3
Figure 22: Control buttons of the remote control
1. Channel button
2. Arrow buttons
3. Adjustment roll
The remote control has two views: Channel view and Settings view. Use the Channel button to move
between the views.
Figure 23: Moving between Channel view and Settings view
Selecting a memory channel or WPS
In the Channel view, use the arrow buttons to move between the channels. There are two kinds of channels:
OPERATING MANUAL | EN 99
©
KEMPPI | 2018-09-28