Instruction Manual
Table Of Contents
- 1. General
- 2. Installation
- 2.1 Installing power source mains plug
- 2.2 Installing cooling unit (optional)
- 2.3 Installing equipment on cart (optional)
- 2.4 Connecting welding gun
- 2.5 Installing earth return cable
- 2.6 Installing remote control (optional)
- 2.7 Installing and replacing feed rolls
- 2.8 Installing and replacing wire guide tubes
- 2.9 Installing and changing wire
- 2.10 Installing gas bottle and testing gas flow
- 2.11 How to get welding programs
- 3. Operation
- 3.1 Preparing welding system for use
- 3.2 Calibrating welding cable
- 3.3 Using control panel
- 3.3.1 Control panel: Home view
- 3.3.2 Control panel: Weld Assist
- 3.3.3 Control panel: Channels
- 3.3.4 Control panel: WPS view
- 3.3.5 Control panel: Welding parameters
- 3.3.6 Control panel: Weld history
- 3.3.7 Control panel: Info view
- 3.3.8 Control panel: Device settings
- 3.3.9 Control panel: Applying welding programs
- 3.3.10 Control panel: Weld data view
- 3.4 Additional guidance to functions and features
- 3.5 Pulse welding
- 3.6 Wireless connection (WLAN)
- 3.7 Using remote control
- 3.8 Changing welding polarity
- 3.9 Lifting equipment
- 4. Maintenance
- 5. Technical data
Master M 358
Operating manual - EN
Feed rolls
The table below lists the standard feed rolls available.
Feed rolls, standard
Filler wire material Feed roll profile*
Filler wire diameter
(mm)
Drive roll code Pressure roll code
Fe, Ss, Cu (Al, MC/FC)
V-groove 0.6 W001045 W001046
0.8−0.9 W001047 W001048
1.0 W000675 W000676
1.2 W000960 W000961
MC/FC (Fe)
V-groove, knurled 1.0 W001057 W001058
1.2 W001059 W001060
Al (MC/FC, Ss, Fe, Cu)
U-groove 1.0 W001067 W001068
1.2 W001069 W001070
The table below lists the heavy-duty feed rolls available.
Feed rolls, heavy-duty
Filler wire material Feed roll profile*
Filler wire diameter
(mm)
Drive roll code Pressure roll code
Fe, Ss (MC/FC)
V-groove 0.8−0.9 W006074 W006075
1.0 W006076 W006077
1.2 W004754 W004753
MC/FC (Fe)
V-groove, knurled 1.0 W006080 W006081
1.2 W006082 W006083
(MC/FC, Ss, Fe)
U-groove 1.0 W006088 W006089
1.2 W006090 W006091
* Feed roll profiles and corresponding symbols:
Feed roll profile Symbol
V-groove
V-groove, knurled
U-groove
© Kemppi
89
1921980 / 2242