Instruction Manual
Table Of Contents
- 1. General
- 2. Installation
- 2.1 Installing power source mains plug
- 2.2 Installing cooling unit (optional)
- 2.3 Installing equipment on cart (optional)
- 2.4 Connecting welding gun
- 2.5 Installing earth return cable
- 2.6 Installing remote control (optional)
- 2.7 Installing and replacing feed rolls
- 2.8 Installing and replacing wire guide tubes
- 2.9 Installing and changing wire
- 2.10 Installing gas bottle and testing gas flow
- 2.11 How to get welding programs
- 3. Operation
- 3.1 Preparing welding system for use
- 3.2 Calibrating welding cable
- 3.3 Using control panel
- 3.3.1 Control panel: Home view
- 3.3.2 Control panel: Weld Assist
- 3.3.3 Control panel: Channels
- 3.3.4 Control panel: WPS view
- 3.3.5 Control panel: Welding parameters
- 3.3.6 Control panel: Weld history
- 3.3.7 Control panel: Info view
- 3.3.8 Control panel: Device settings
- 3.3.9 Control panel: Applying welding programs
- 3.3.10 Control panel: Weld data view
- 3.4 Additional guidance to functions and features
- 3.5 Pulse welding
- 3.6 Wireless connection (WLAN)
- 3.7 Using remote control
- 3.8 Changing welding polarity
- 3.9 Lifting equipment
- 4. Maintenance
- 5. Technical data
Master M 358
Operating manual - EN
5.4 Wire feeder consumables
This section lists the feed rolls and wire guide tubes available both separately and in consumable kits. The consumable
kits contain recommended feed roll and wire guide tube combinations for selected filler wire materials and diameters.
The wire feeder consumables can be ordered in
Configurator.kemppi.com.
In the tables, standard refers to plastic feed rolls and heavy-duty refers to metal feed rolls. The materials mentioned first
refer to primary suitability and the materials mentioned inside brackets refer to secondary suitability.
Wire feeder consumable kits
The table below lists the recommended consumable kits for selected filler wire materials and diameters.
Wire feeder consumable kits
Filler wire material Feed roll profile*
Filler wire diameter
(mm)
Consumable kit code,
standard
Consumable kit code,
heavy-duty
Fe (MC/FC)
V-groove 0.8−0.9 F000488 F000492
1.0 F000489 F000493
1.2 F000490 F000494
Ss (Fe, Cu)
V-groove 0.8−0.9 F000455 -
1.0 F000456 -
1.2 F000457 -
Ss (Fe)
V-groove 0.8−0.9 - F000458
1.0 - F000459
1.2 - F000460
MC/FC
V-groove, knurled 1.0 F000499 F000502
1.2 F000500 F000503
Al
U-groove 1.0 F000461 -
1.2 F000462 -
Wire guide tubes
The table below lists the wire guide tubes available.
Wire guide tubes
Filler wire material
Filler wire diameter
(mm)
Inlet guide tube Middle guide tube Outlet guide tube
Al, Ss (Fe, MC/FC)
0.6 SP007293 SP007273 SP016608
0.8−0.9 SP007294 SP007274 SP011440
1.0 SP007295 SP007275 SP011441
1.2 SP007296 SP007276 SP011442
Fe, MC/FC
0.6 (SP007293) (SP007273) SP016613
0.8−0.9 SP007536 (SP007274) SP016614
1.0 SP007537 (SP007275) SP016615
1.2 SP007538 (SP007276) SP016616
© Kemppi
88
1921980 / 2242