Instruction Manual
Table Of Contents
- 1. General
- 2. Installation
- 2.1 Installing power source mains plug
- 2.2 Installing cooling unit (optional)
- 2.3 Installing equipment on cart (optional)
- 2.4 Connecting welding gun
- 2.5 Installing earth return cable
- 2.6 Installing remote control (optional)
- 2.7 Installing and replacing feed rolls
- 2.8 Installing and replacing wire guide tubes
- 2.9 Installing and changing wire
- 2.10 Installing gas bottle and testing gas flow
- 2.11 How to get welding programs
- 3. Operation
- 3.1 Preparing welding system for use
- 3.2 Calibrating welding cable
- 3.3 Using control panel
- 3.3.1 Control panel: Home view
- 3.3.2 Control panel: Weld Assist
- 3.3.3 Control panel: Channels
- 3.3.4 Control panel: WPS view
- 3.3.5 Control panel: Welding parameters
- 3.3.6 Control panel: Weld history
- 3.3.7 Control panel: Info view
- 3.3.8 Control panel: Device settings
- 3.3.9 Control panel: Applying welding programs
- 3.3.10 Control panel: Weld data view
- 3.4 Additional guidance to functions and features
- 3.5 Pulse welding
- 3.6 Wireless connection (WLAN)
- 3.7 Using remote control
- 3.8 Changing welding polarity
- 3.9 Lifting equipment
- 4. Maintenance
- 5. Technical data
Master M 358
Operating manual - EN
Degree of protection
IP23S
External dimensions
L
x
W
x
H
602 x 298 x 447 mm
Package external dimensions
L
x
W
x
H
610 x 300 x 445 mm, with
cooler 700 mm
Weight
27 kg
Voltage supply for auxiliary devices
12 V
Voltage supply for cooling unit 380...460 V
220...230 V
24 V
24 V
Recommended minimum gen-
erator power
@ 400 V
S
gen
20 kVA
Wired communication type
CAN
Wireless communication type
Internal wireless module
WUBT-236ACN(BT)
- Wi-Fi standard
IEEE 802.11 ac/a/b/g/n
- Bluetooth version
4.2 (LE)
- Operating frequencies
2.412...2.484 GHz, 5.150...5.850
GHz
Lithium-ion battery
SAMSUNG SDI: INR18650-26J;
3,6 V; 2600 mAh LG CHEM:
ICR18650HE4; 3,6 V; 2500 mAh
Standards
IEC 60974-1, -10
© Kemppi
85
1921980 / 2242