Instruction Manual
Table Of Contents
- 1. General
- 2. Installation
- 2.1 Installing power source mains plug
- 2.2 Installing cooling unit (optional)
- 2.3 Installing equipment on cart (optional)
- 2.4 Connecting welding gun
- 2.5 Installing earth return cable
- 2.6 Installing remote control (optional)
- 2.7 Installing and replacing feed rolls
- 2.8 Installing and replacing wire guide tubes
- 2.9 Installing and changing wire
- 2.10 Installing gas bottle and testing gas flow
- 2.11 How to get welding programs
- 3. Operation
- 3.1 Preparing welding system for use
- 3.2 Calibrating welding cable
- 3.3 Using control panel
- 3.3.1 Control panel: Home view
- 3.3.2 Control panel: Weld Assist
- 3.3.3 Control panel: Channels
- 3.3.4 Control panel: WPS view
- 3.3.5 Control panel: Welding parameters
- 3.3.6 Control panel: Weld history
- 3.3.7 Control panel: Info view
- 3.3.8 Control panel: Device settings
- 3.3.9 Control panel: Applying welding programs
- 3.3.10 Control panel: Weld data view
- 3.4 Additional guidance to functions and features
- 3.5 Pulse welding
- 3.6 Wireless connection (WLAN)
- 3.7 Using remote control
- 3.8 Changing welding polarity
- 3.9 Lifting equipment
- 4. Maintenance
- 5. Technical data
Master M 358
Operating manual - EN
WeldEye's modular structure is based on various useful functions that serve the needs of wide-ranging industries and
welding-related tasks:
• Welding procedures
>> Includes the digital library and management of pWPS, WPQR and WPS templates according to the most import-
ant welding standards.
• Personnel and qualifications
>> Includes the management and renewal processes of all personnel - welders and inspectors - qualification cer-
tificates.
• Quality management
>> Includes quality verification functionalities with digital WPS and qualification compliance control against auto-
matically collected digital welding data.
• Welding management
>> Includes document register functionalities and features for comprehensive welding project documentation and
management.
For more information on WeldEye, refer to www.weldeye.com.
3.6.4 USB backup and restore
The USB backup feature allows the current welding parameters, memory channels and other settings to be backed up
on a USB memory stick.
1. Turn the welding machine on.
2. If creating a backup, go to the device settings and select Backup.
3. If restoring from a backup, go to the device settings and select Restore.
4. Open the USB connector cover and connect the USB memory stick to the Master M 358 control panel.
5. Follow the steps on the control panel screen to complete the backup/restore operation.
3.6.5 USB update
The USB update feature allows the firmware to be updated as well as welding programs, processes and features to be
installed using a USB memory stick.
© Kemppi
64
1921980 / 2242