Instruction Manual

Table Of Contents

Master M 358

Operating manual - EN

7. To save, scroll down to Save to and select it.

Select the memory channel slot for saving and confirm.

Once ready, you can continue to the Welding parameters view to adjust the welding settings for the new channel, create

a new channel or go back to the Channels view.

Tip: It is also possible to create new channels based on all of the unused welding programs available for the

selected operation mode by selecting Create allin the Channel view's actions menu. This option uses the avail-

able memory channel slots.

3.3.10 Control panel: Weld data view

After each weld, a weld summary is displayed briefly. To change the weld data view duration or how the weld data aver-

ages are calculated (with or without slope phases), refer to "Control panel: Device settings" on page51.

1921980 / 2242