Instruction Manual
Table Of Contents
- 1. General
- 2. Installation
- 2.1 Installing power source mains plug
- 2.2 Installing cooling unit (optional)
- 2.3 Installing equipment on cart (optional)
- 2.4 Connecting welding gun
- 2.5 Installing earth return cable
- 2.6 Installing remote control (optional)
- 2.7 Installing and replacing feed rolls
- 2.8 Installing and replacing wire guide tubes
- 2.9 Installing and changing wire
- 2.10 Installing gas bottle and testing gas flow
- 2.11 How to get welding programs
- 3. Operation
- 3.1 Preparing welding system for use
- 3.2 Calibrating welding cable
- 3.3 Using control panel
- 3.3.1 Control panel: Home view
- 3.3.2 Control panel: Weld Assist
- 3.3.3 Control panel: Channels
- 3.3.4 Control panel: WPS view
- 3.3.5 Control panel: Welding parameters
- 3.3.6 Control panel: Weld history
- 3.3.7 Control panel: Info view
- 3.3.8 Control panel: Device settings
- 3.3.9 Control panel: Applying welding programs
- 3.3.10 Control panel: Weld data view
- 3.4 Additional guidance to functions and features
- 3.5 Pulse welding
- 3.6 Wireless connection (WLAN)
- 3.7 Using remote control
- 3.8 Changing welding polarity
- 3.9 Lifting equipment
- 4. Maintenance
- 5. Technical data
Master M 358
Operating manual - EN
3.4.4 WisePenetration+ feature 57
3.4.5 WiseSteel feature 58
3.5 Pulse welding 59
3.5.1 MAX Cool process 59
3.5.2 MAX Position process 60
3.5.3 MAX Speed process 60
3.6 Wireless connection (WLAN) 61
3.6.1 Digital Welding Procedure Specification (dWPS) 62
3.6.2 WeldEye ArcVision 62
3.6.3 WeldEye with DCM 63
3.6.4 USB backup and restore 64
3.6.5 USB update 64
3.7 Using remote control 66
3.8 Changing welding polarity 67
3.9 Lifting equipment 69
4. Maintenance
70
4.1 Daily maintenance
71
4.2 Periodic maintenance 72
4.3 Service workshops 73
4.4 Troubleshooting 74
4.5 Error codes 76
4.6 Installing and cleaning power source air filter (optional) 78
4.7 Disposal 80
5. Technical data
81
5.1 Master M 358 device
82
5.2 Master M cooling unit 86
5.3 Master M 358 ordering info 87
5.4 Wire feeder consumables 88
5.5 Welding program work packs 90
© Kemppi
3
1921980 / 2242