Instruction Manual

Master M 358
Operating manual - EN
CONTENTS
1. General
4
1.1 Equipment description
5
1.2 Master M 358 device 7
1.2.1 Wire feed mechanism 9
1.2.2 Control panel 9
1.3 Master M Cooler cooling unit (optional) 11
2. Installation
12
2.1 Installing power source mains plug
13
2.2 Installing cooling unit (optional) 14
2.3 Installing equipment on cart (optional) 16
2.4 Connecting welding gun 18
2.5 Installing earth return cable 19
2.6 Installing remote control (optional) 20
2.7 Installing and replacing feed rolls 21
2.8 Installing and replacing wire guide tubes 23
2.9 Installing and changing wire 24
2.10 Installing gas bottle and testing gas flow 29
2.11 How to get welding programs 31
3. Operation
32
3.1 Preparing welding system for use
33
3.1.1 Filling cooler and circulating coolant 33
3.2 Calibrating welding cable 35
3.3 Using control panel 36
3.3.1 Control panel: Home view 37
3.3.2 Control panel: Weld Assist 38
3.3.3 Control panel: Channels 39
3.3.4 Control panel: WPS view 41
3.3.5 Control panel: Welding parameters 44
3.3.6 Control panel: Weld history 50
3.3.7 Control panel: Info view 50
3.3.8 Control panel: Device settings 51
3.3.9 Control panel: Applying welding programs 53
3.3.10 Control panel: Weld data view 55
3.4 Additional guidance to functions and features 56
3.4.1 Trigger logic functions 56
3.4.2 1-MIG 57
3.4.3 WiseFusion feature 57
© Kemppi
2
1921980 / 2242