Operation Manual

EN
3.2.1 DuraTorque™ 400, 4-wheel wire feeder mechanism
Wire guide tubes
Ss, Al, Fe,
Mc, Fc
ø 0.6...1.6 mm ø 2.5/64 mm,
W000762,
silver, plastic
ø 2.5/33 mm,
W000956,
silver, plastic
ø 2.0 mm,
W000624,
plastic
ø 1.6..0.20.4
mm
ø 3.5/64 mm,
W001430,
silver, plastic
ø 3.5/33 mm,
W001431,
silver, plastic
ø 3.5 mm,
W001389,
plastic
Fe, Mc, Fc ø 0.6..0.00.8
mm
ø 1.0/67 mm,
W001432,
white, steel
ø 2.0/33 mm,
W001435,
orange, steel
ø 2.0 mm,
W000624,
plastic
ø 0.9...1.6 mm ø 2.0/64 mm,
W001433,
orange, steel
ø 3.5 mm,
W001389,
plastic
ø 1.6..0.20.4
mm
ø 4.0/63 mm,
W001434,
blue, steel
ø 4.0/33 mm,
W001436,
blue, steel
ø 3.5 mm,
W001391,
brass
24.8.2005 12:55
2.
1.
Parts of the DT400 metal feed rolls
W000731 gear ring 1 driving 2 pcs per unit
W000732 gear ring 2 pressing 2 pcs per unit
W000711 drive ring V groove 1,2/1,2 optional 4 pcs per unit
W000718 drive ring V groove 1,0/1,0 optional 4 pcs per unit
W000891 drive ring V groove 1,0/1,2 optional 4 pcs per unit
9420507 washer 10.5x30x2.5 2 pcs per unit
3.3 REGULAR MAINTENANCE
Make sure that the machine receives regular and appropriate maintenance. Authorised
Kemppi service agents perform regular maintenance by agreement. For more information on
regular maintenance, contact a Kemppi representative.
19
KempArc SYN 300, 400, 500, DT 400 / © Kemppi Oy / 1117