Operation Manual

43
A7 TIG Orbital System 300© Kemppi Oy 2016 1615
OPERATING MANUAL
4.3 Ordering information
Kemppi uses ceriated tungsten which increases electrode life, arc starting, and
stability. We recommend this for orbital use. 2% ceriated involves no radiation
risk. These tungsten electrodes are commonly marked in grey color.
Ordering codes of standard length (175 mm) tungsten electrodes and electrode
machining tools:
Product name Product code
10 pcs. 1.0 mm diameter, 175 mm long 9873531
10 pcs. 1.6 mm diameter, 175 mm long 9873532
10 pcs. 2.4 mm diameter, 175 mm long 9873533
Ultima – TIG – cut, tungsten electrode cutting/sharpening
machine
6270001
Neutrix, portable, tungsten electrode sharpening machine 6270002
Auto Grind, Tungsten electrode automated grinder. 6270003
Tungsten electrode cutting devices listed above can be used to prepare correct
length and angle from standard tungsten electrodes.
Product name Product code
A7 TIG Orbital Controller 300 6204300
A7 TIG remote control (pendant) 6204301
Tungsten electrode L = 175 mm, Ø = 1.0 mm, 10 pc 9873531
Tungsten electrode L = 175 mm, Ø = 1.6 mm, 10 pc 9873532
Tungsten electrode L = 175 mm, Ø = 2.4 mm, 10 pc 9873533
Orbital weld head 300 6206007
Orbital weld head 300 consumables SP800684
Expendable kit for weld head 300 SP800685
Fillet weld kit for weld head 300 series SP800686
Angled AGC kit for weld head 300 series (with torch cable) SP800687
Wire size kit for 1.0 mm ller wires SP800688