Operation Manual

30
A7 TIG Orbital System 300© Kemppi Oy 2016 1615
OPERATING MANUAL
3.3.7 Advanced Help
Advanced Help allows you to diagnose problems which
may result from an external situation (e.g. an empty
gas bottle) or an internal situation (e.g. the weld head
control cable is damaged or not connected). Advanced
Help provides assistance for the operator as well as for a
competent electric repair technician.
3.3.8 Autotack
Tack welding is useful when welding larger diameter tubes,
for which Autotack automatically generates a tack-welding
program. Select 4 or 8 equally spaced tacks. Tacking
parameters penetrate approximately 70% of the tube wall.
If the intention is to make the weld to immediately follow
tacking, set the welding program as the “Next Weld to Run”
and the program is loaded automatically.