Operation Manual

33
A7 TIG Orbital System 150© Kemppi Oy 2016 1615
OPERATING MANUAL
4. ADDITIONAL DETAILS
4.1 Technical data
Property Value
Mains connection voltage 230 VAC ± 10%
Fuse (delayed) 16 A
Maximum output current 220 A @ 40 %, 170 A @ 100 %
Weld heads 150 series
Pipe outer diameter (O.D.) 3.2−152.4 mm
Welding positions All
Auto-stop Yes
Type of ignition HF
Cooling (controller unit) Forced air
Cooling (weld head) Internal coolant circulator
Controller external dimensions (L x W x H) 501 x 273 x 670 mm
Weight 32 kg
Degree of protection IP 23
Operating temperature -20…+40 °C
5. ORDERING INFORMATION
The chart below shows the products and options required. A complete orbital welding
system requires an orbital controller, a weld head of suitable size, collets for the weld head
(extended or ush) and cut-to-length tungsten electrodes. There are several additional
pieces of equipment available as listed below to complete a productive orbital welding
environment.
Weld head
Gas purge kit
Oxygen content meter
Dual pressure regulator
Tungsten grinding &
cutting equipment
Electrodes 1.0, 1.6 and 2.4 mm
Extended cables
weld head model 15010
Collets
weld head model 15020
Flush
weld head model 15030
Extended
weld head model 15040
Electrode
weld head model 15060
A7 TIG Orbital Controller 150