Operation Manual

A7 TIG Orbital System 150© Kemppi Oy 2016 1615

OPERATING MANUAL

1. Input all information as in Autogen but select the

number of Passes and Levels.

2. Move the cursor to the desired line and use the

control knob or Enter and control knob for OD and

Wall Thickness.

3. You can turn on Auto tack program if necessary

using the control knob.

4. Press Next.

3.8.8 Pulsing levels

You can select pulsed or non-pulsed current. Move the

cursor and use the control knob to change selections.

Pulsing varies the current between high and low values.

3.8.9 RPM Step

RPM Step can be turned on/o. This function indexes

tungsten electrode rotation with pulsed current. Tungsten

electrode will rotate during low current pulse and stop on

high current pulse (or be set to run at a percentage of low

current speed). Press Next.