Operation Manual

23
A7 TIG Orbital System 150© Kemppi Oy 2016 1615
OPERATING MANUAL
3.8.6 Alphanumeric labeling
Using the oating keyboard
The keyboard is accessible when a highlighted line
requires keyboard input; such as in the Password Entry or
Program Notes screen or on any other text entry line.
Use the cursor to select the item to be labeled.
Entering text
1. Press Enter on a text entry line to display the
oating keyboard.
2. Use the control knob to select a character.
3. Press Enter to insert selected on the line.
Arrow keys move the highlighted character to the left or
right along the line. You can replace a typed character by
moving the highlighted cursor on it and using the control
knob.
Use Delete (Del) to erase a line. This function only deletes
the last character on the line.
To end text entry and move to the next line on the screen,
press Up or Down.
3.8.7 Manual programming
Use in the same way as Auto program but select each
parameter and technique that you want to use. If password
protection has been applied, you will need to submit
password to continue.
1. Select No with the control knob. Press Next.
2. Select Weld Number with control knob. Press Next.