Operation Manual

A7 TIG Orbital System 150© Kemppi Oy 2016 1615

OPERATING MANUAL

2. Press Start Weld to initiate weld or press Purge to

pull in gas solenoid if you want to use a longer

purge time. (For example, to purge gas lines when

rst connecting the weld head to the power

source.)

Use the Up/Down cursor to select from software

accessories:

• Maintenance Menu

• Copy Welds

• Delete Welds

• Print Welds

• QC Set-up

• Options

New

Create procedures using either the Auto program or

standard manual entry.

Navigating

• Select and proceed through a task using four soft

keys (see Main screen/ Menu). The selected item

is highlighted in red. To select an item, use the

up/down keys to highlight the selection in red

(move the cursor).

• To change a numerical value, select Yes/No, or

select an item from a drop-down menu using the

control knob.

• To move to the next screen, press the Next soft

key.

• Certain items are selected using Enter: for

example, the digit to be changed (00.00) or the

text labeling subroutine.