Operation Manual

9
Robot Gun Mount T3© Kemppi Oy 2016 1712
OPERATING MANUAL
9. STORAGE
The physical conditions for storage in a closed room are -10 °C to 55 °C.
10. FUNCTIONAL DESCRIPTION
The Kemppi Robot Gun Mount T3 unit is used for accommodating welding guns in the
exact position needed. The mount is fastened to the robot by means of cylinder-head
screws and a plastic intermediate ange. In order to cover the required performance
ranges, there are two distinct mount versions available:
• A gas-cooled version
• A liquid-cooled version
For Robot Gun Mount T3, the TCP coordinates are the same as the coordinates of the
corresponding welding gun.
Two types of standard welding guns are available for Robot Gun Mount T3, the gas-
cooled A7 MIG Gun 500-g and the water-cooled A7 MIG Gun 500-w.
Robot Gun Mount T3 does not have integrated collision protection. Collision protection
or switching o of the robot can be performed only by robot control.