Operation Manual

8
Robot Gun Mount T3© Kemppi Oy 2016 1712
OPERATING MANUAL
6.5 Abbreviations
For pulse-arc use, the load values are reduced by up to 35%.
ED
Duty cycle
MIG
Metal inert gas
MAG
Metal active gas
MAC value
Maximum allowable concentration of harmful substances in the
workplace
Voltage rating
Insulation resistance, electric strength, and protection class
TCP
Tool center point
6.6 The type plate
Robot Gun Mount T3 is identied by a sticker or a Kemppi logo. When contacting the
service sta, please remember to check the production stamp near the Kemppi logo.
Figure 3: T3 type plate
• Serial number
• Flange serial number
• F intermediate ange serial number
7. DELIVERY SCOPE
The delivery for a gas-cooled gun includes the following components:
• Kemppi Robot Gun Mount T3
• Operating instructions
• Cylinder-head screws, M4×10 (4 pcs.)
• Certicate of conformity
• Screwdriver for hexagon-head screws, wrench size 2.5
• Sealing grease, silicone-free, 10 g can
The equipment parts and wear parts are ordered separately.
Order data and ID codes for the equipment parts and wear parts can be found in the
current catalogue. Contact details for advice and for placing orders can be found
online at www.kemppi.com.
8. TRANSPORT
The components are carefully checked and packed; however, damage may still occur
during shipping.
Checking procedure on
receipt of goods
Check that the shipment is correct by referring to the
shipping note.
In case of damage
Check the package and components for damage (perform a
visual inspection).
In the event of problems
If the goods have been damaged during transport, contact
the last carrier immediately. Keep the packaging (for possible
checks by the carrier).
Packaging for return of
the goods
Use the original packaging and the original packaging
material. If you have questions about the packaging and
safety during shipment, please consult your supplier.