Operation Manual

4
Robot Gun Mount T3© Kemppi Oy 2016 1712
OPERATING MANUAL
3. IDENTIFICATION
Kemppi Robot Gun Mount T3 is used in industry and in the
trade for connecting the gun neck to a robot equipped
with central media guidance. It is available for gas-cooled
guns (A7 MIG Gun 500-g) and liquid-cooled guns (A7
MIG Gun 500-w) by means of dierent adapter anges.
These instructions describe Kemppi Robot Gun Mount T3
only. This Kemppi robot mount must be operated only as
supplied or equipped with authentic Kemppi spare parts.
Figure 1: Kemppi Robot Gun Mount T3
4. CE MARKING
This device fulls the requirements of the following EU
directives:
• The Machinery Directive, 2006/42/EC
• The EMC Directive, 2004/108/EC
• The RoHS Directive, 2011/65/EU
5. SAFETY
Read and follow the additional safety instructions
enclosed.
5.1 Designated use
Robot Gun Mount T3 may be used only for the purpose
described in these instructions, in the manner described.
Follow the operation, maintenance, and servicing
conditions whenever using the device.
Any other use is considered contrary to the intended use.
Unauthorized conversions or power-increasing
modications are not allowed.
The warranty does not cover wear parts and damage due
to overloading or improper use.
5.2 Responsibilities of the user
• Keep the operating instructions within easy reach
in the location of the device for reference, and
include the operating instructions when handing
over the product.
• Installation, operation, and maintenance work
may only be carried out by qualied personnel.
Qualied personnel are persons who, on account
of their special training, knowledge, experience,
and familiarity with the relevant standards, are
able to assess the tasks assigned to them and
identify possible dangers.
• Keep all other people out of the work area.
• Follow the accident prevention regulations of the
relevant country.
• Ensure good lighting of the work area, and keep
it clean.
• Observe the following standards and guidelines
in particular:
• 89/391/EEC: Directive on the introduction
of measures to encourage improvements in
the safety and health of workers at work
• 2009/104/EC: Directive concerning the
minimum safety and health requirements
for the use of work equipment by workers
at work
• 2004/108/EC: Directive on the
harmonization of the laws of the Member
States relating to electromagnetic
compatibility The occupational health and
safety regulations of the country in question
• Regulations on occupational safety and
accident prevention
5.3 Personal protective equipment
To avoid danger to the user, using personal protective
equipment (PPE) is recommended in these instructions.
PPE consists of the following:
• Protective clothing
• Safety goggles
• A class-P3 respiratory mask
• Gloves
• Safety shoes