Operation Manual

18
Robot Gun Mount T3© Kemppi Oy 2016 1712
OPERATING MANUAL
15. TROUBLESHOOTING
Risk of injury due to unexpected start-up
For the entire duration of maintenance, servicing, unmounting, and repair work, the
following instructions must be adhered to:
• Switch o the power supply.
• Cut o the compressed air supply.
• Pull the power plug.
In the event of any doubts or problems, please contact your retailer or the manufacturer.
Please also consult the operating instructions for the other welding components, such
as the power supply or air pressure line.
Problem Cause Solution
Problems in mounting the hose assembly
on the robot mount
No grease on the O-rings of the adapter Grease the O-rings with sealing grease
(included in the delivery)
The hose assembly adapter is not
correctly inserted into the module
Use the pull-in tool
Hose assembly creates ripples in the
robot axis
Hose assembly too long Change the feeding system positioning, if
possible