Operation Manual

Robot Gun Mount T2, T4© Kemppi Oy 2017 1712

OPERATING MANUAL

15. MAINTENANCE AND CLEANING

Scheduled maintenance and cleaning are prerequisites for a long service life and

trouble-free operation.

Once a month, thoroughly clean the robot mount to remove all dirt and welding spatter.

Risk of injury due to unexpected start-up

For the entire duration of maintenance, servicing, unmounting, and repair work, the

following instructions must be adhered to:

• Switch o the power supply.

• Cut o the compressed air supply.

• Pull the power plug.

Electric shock

Dangerous voltages can be produced because of defective cables.

• Check all live cables and connections for proper installation.

• Replace any parts that have suered damage, deformation, or wear.

The maintenance intervals listed are recommended values and assume single-shift

operation.

• Maintenance and cleaning work may only be carried out by qualied and

trained specialists.

• Always wear your personal protective clothing when performing maintenance

and cleaning work.

• When replacing the liquid-cooled A7 MIG Gun 500-w hose assemblies, make

sure that any coolant residues are removed from the robot mount.

• The maintenance intervals listed are recommended values and assume single-

shift operation.