Operation Manual
10
Robot Gun Mount T2, T4© Kemppi Oy 2017 1712
OPERATING MANUAL
11. FUNCTIONAL DESCRIPTION
The holding force of the inserted springs is directly applied to the release ange
and xes the switching axis, which is positioned by three pins, in the zero position.
In the event of collision, the switching axis tips over, the release ange pushes the
spring plate toward the base of the housing, and the trigger is actuated by the
spring plate’s actuating mechanism. The applied switching voltage is interrupted.
Figure 5: Functional diagram
M8×1 M9×0.5
3
1
2
3 Signal1
2 24 V2
1 GND3
1. 3-pole ange plug
2. Microswitch triggered
3. Microswitch in resting position
8. DELIVERY SCOPE
The delivery for a gas-cooled gun includes the following components:
• Kemppi Robot Gun Mount T2 or T4
• Operating instructions
• Cylinder-head screws, M4×55 (6 pcs.)
• Certicate of conformity
• Connection cable
The equipment parts and wear parts are ordered separately.
Order data and ID codes for the equipment parts and wear parts can be found in the
current catalogue. Contact details for advice and for placing orders can be found
online at www.kemppi.com.
9. TRANSPORT
The components are carefully checked and packed; however, damage may still occur
during shipping.
Checking procedure on
receipt of goods
Check that the shipment is correct by referring to the
shipping note.
In case of damage
Check the package and components for damage (perform
a visual inspection).
In the event of problems
If the goods have been damaged during transport, contact
the last carrier immediately. Keep the packaging (for
possible checks by the carrier).
Packaging for return of
the goods
Use the original packaging and the original packaging
material. If you have questions about the packaging and
safety during shipment, please consult your supplier.
10. STORAGE
The physical conditions for storage in a closed room are -10 °C to 55 °C.