Operation Manual

A7 MIG Welder© Kemppi Oy 2018 1804

INTEGRATION GUIDE

5.1.3 Gas sensor settings

Gas sensor

Set the gas sensor to be ON or OFF, on the basis of the gas ow monitoring requirements

of your system.

Gas ow sensing level

Set the gas ow sensing threshold, in liters per minute. When the gas ow exceeds this

level, the system indicates that the gas ow is OK.

Gas type (integrated gas sensor)

Set the type of the shielding gas used in your conguration. This value must be changed

every time the gas type is changed. The gas type selected aects the operation of the gas

ow sensor.

Gas mixture (bus-controlled gas sensor)

Set the gas mixture according to the concentration of the shielding gas used in your

conguration. This value must be changed every time the shielding gas is changed. The

gas mixture aects the function of the gas ow sensor.