Operation Manual

A7 MIG Welder© Kemppi Oy 2018 1824

OPERATING MANUAL

4.4.8 Resetting PIN code

The administrator can reset a PIN code to let the user

redene it and access the system again. Resetting the PIN

code requires administrator privileges.

Setup panel

Go to the Main menu > User settings and provide your PIN

code to access the menu. Go to the Reset user PIN code

and select the user whose PIN code you want to reset.

Conrm reset by pressing the OK button.

Web user interface

Go to the Settings > Users page. The user identication

system must be turned on to access users. Press the Reset

PIN button on the right side of the user whose PIN code

you want to reset. Please note that the reset operation is

not conrmed – pressing the Reset PIN button will reset

the PIN code immediately. A dialog with an OK button will

appear indicating a successful operation.

4.4.9 Logging in and out, changing active user

Setup panel

The setup panel displays User logged o text when no

user is logged in. To log in press the F2 button, select a

user, provide a valid PIN code and press OK. You are now

logged in.

To log out, press F2, select Log o and press Select.

Alternatively, press the power button on the setup panel

for ve seconds to log out.

When a user has already logged in, you can log in as an

active user without logging out. To change you as the

active user, press the F2 button, select your user account,

provide a valid PIN code and press OK. You are now the

active user and the other user account is logged out

automatically.

Web user interface

The web user interface shows the login page when no user

is logged in. To log in, select a user from the drop-down

box, provide a valid PIN code and press the Login button.

To log out, locate your username in the right top right

corner of the view. Press your name to open a drop-down

list and select logout. The web user interface will redirect

you to the login page.

When a user has already logged in, follow the logout and