Operation Manual

40
A7 MIG Welder© Kemppi Oy 2018 1824
OPERATING MANUAL
4.4.4 Deleting a user
Deleting a user requires administrator privileges.
Welders and supervisors cannot delete users. At least
one administrator account is required in the system. You
cannot delete your own account.
Setup panel
Go to the Main menu > User settings and provide your
PIN code to access the User settings menu. Go to the User
activation and select the user you want to delete. Switch
the user to Disabled and press the Set button. The user
is now deleted and the account released for further use.
Web user interface
Go to the Settings > Users page. The user identication
system must be turned on to access user settings. Users
have a Delete button in their user account. Press the
button to delete a user. A conrmation dialog with Delete
and Cancel buttons appears. Press the Delete button
on the dialog. The user is now deleted and the account
released for new user.
4.4.5 Changing user role
When a new user is created in the web user interface, the
user role is specied for the user in the same view. When
a new user is created in the setup panel, the default role
is Welder. The role can be changed afterwards. Changing
a user role requires administrator privileges.
Setup panel
Go to the Main menu >User settings and provide your
PIN code to access the User settings menu. Go to the Set
user rights and select the user whose role you want to
change.
You cannot change your own role.
Select the role and press the Set button to save the
settings.
Web user interface
Go to the Settings > Users page. The user identication
system must be turned on to access user settings. Press
the orange arrow > to left of the user icon to see the user
options. Select the role for the user by clicking on the
Welder, Supervisor or Administrator buttons. A pop-up
dialog with Save and Reset changes buttons will appear
at the bottom. Click the Save button to save the settings.
4.4.6 Changing username
Usernames can be congured in the web user interface.
The setup panel does not have this functionality.
Changing a username requires administrator privileges.
The user identication system must be turned on to
access user settings.
Go to the Settings > Users page. Click on the username
you want to change and retype the name. A pop-up
dialog with Save and Reset changes buttons will appear
at the bottom. Click the Save button to save the settings.
4.4.7 Changing PIN code
By default, the PIN code for each user is 0000 (four zeroes).
Users can protect their user accounts by personalizing
this code. In order to change the PIN code, the user
identication system must be turned on.
Setup panel
Go to Main menu > User settings and provide your PIN
code to access the User settings menu. Go to Change
PIN code and specify the new PIN code digit by digit. Go
to the next digit by pressing the Next button. After the
fourth digit press the OK button to save the settings. The
PIN code is now changed.
Web user interface
Go to the Settings > Change PIN page. On the page, enter
the old PIN code in the rst box and the new PIN code
twice in the boxes below. Press the Change PIN button.
The PIN code is now changed.