Operation Manual

36
A7 MIG Welder© Kemppi Oy 2018 1824
OPERATING MANUAL
4.3.9 Settings – Fieldbus
Figure 4.15 Settings – Fieldbus view
In the Fieldbus view you can identify the eldbus, view
the eldbus specic information and set the conguration
values. The available information and configuration
parameters depend on the eldbus type. See the A7 MIG
Welder Integration guide for more information.
Accessing this view requires administrator or service
supervisor rights.
Changing the eldbus settings aects the
communication between the welder system and the robot.
4.3.10 Settings – Network
Figure 4.16 Settings – Network view
In the Network menu you can congure the network
settings of the web user interface server. See the A7 MIG
Welder Integration guide for more information about the
network conguration.
Accessing this view requires administrator or service
supervisor rights.
Changing the network settings aects your access to
the web user interface.