Operation Manual

34
A7 MIG Welder© Kemppi Oy 2018 1824
OPERATING MANUAL
In the Gas sensor settings menu you can
• select Gas sensor ON and OFF.
• adjust Gas ow sensing level by using the slider bar.
• select Gas type from the drop-down menu (for an integrated gas sensor).
OR
• select Argon, Carbon Dioxide, Nitrogen, Oxygen, Hydrogen and Helium
concentration in a Gas mixture (for a bus-controlled gas sensor).
In the General robot settings menu you can
• select Interface mode for the digital robot interface in the selection box.
• adjust Voltage scaling by using the slider bar.
• adjust Wire feed speed scaling by using the slider bar.
• adjust Current scaling by using the slider bar.
• select Simulation mode by OFF, ON or SELECT AT ROBOT by clicking on the
buttons.
• select Gun type from the drop-down menu.
In the Touch sensor settings menu you can
• select Output voltage from the drop-down menu.
• select Touch tool WELDING WIRE, GAS NOZZLE or SELECT AT ROBOT by clicking
on the buttons.
• select Fast output polarity LOW-ACTIVE or HIGH-ACTIVE by clicking on the
buttons.
In the Collision sensor settings menu you can
• select Collision sensor ON and OFF by clicking on the buttons.
• select Switch type OPENING or CLOSING by clicking on the buttons.
• select Output polarity LOW-ACTIVE or HIGH-ACTIVE by clicking on the buttons.
In the Emergency stop settings menu you can
• select Emergency stop ON and OFF by clicking on the buttons.
• select Gate door switch ON and OFF by clicking on the buttons.
• select Switch type for the emergency stop and the gate door switch by clicking
on the buttons.
• select Line level for the emergency stop and the gate door switch by clicking on
the buttons.
In the Watchdog settings menu you can
• select Watchdog ON and OFF by clicking on the buttons.
• adjust Timeout by using the slider bar.
In the Welding system time menu you can
• select date by clicking on the date and selecting year, month and day from a
pop-up calendar.
• set time by clicking on the time and typing new time in to the eld.
• synchronize with the current system time by clicking the NOW button.