Operation Manual
17
A7 MIG Welder© Kemppi Oy 2018 1824
OPERATING MANUAL
Edit channel (displayed when the selected channel is not empty)
Menu item Value range Description
1/6 Select weld curve Change the weld curve. The curve
selection follows the same method as
when creating a new channel.
2/6 Welding parameters * Select welding parameters, like wire feed
speed and ne tuning. The list of the
available welding parameters depends on
the selected welding process.
3/6 Welding functions * Select welding functions, like hot start,
creep start and crater ll.
4/6 Advanced functions * Select advanced welding functions, like
WiseFusion and WisePenetration.
5/6 Copy channel to… Make a copy from this memory channel to
another channel.
Copy channel to 0 - 199 Select the channel number where to make
the copy. Note that making the copy
to a non-empty channel overwrites the
channel data without conrmation.
6/6 Erase channel Make this channel empty by erasing all
data from the channel.
* See the tables Welding parameters and Welding functions for more information.