Operation Manual

ManualsBrandsKemppi ManualsToolsA7 MIG Power Source 350

A7 MIG Welder© Kemppi Oy 2018 1824

OPERATING MANUAL

4.2.2 Main menu

Main menu list

Menu item Description

1/8 Edit channel Open a memory channel wizard and create, modify and delete

memory channels.

2/8 User settings Select, add, edit and delete users (requires login). See Section 4.4 ”User

identication” for more information.

3/8 Weld data Check the values of the last weld.

4/8 System cong

Congure the welding system and view device information.

5/8 Language Select the menu language.

6/8 Select feeder

(WF#)

Select another parallel wire feeder for setup.

7/8 Test menu Test system devices.

8/8 Robot menu Congure the robot interface and devices for automated welding.

4.2.3 Memory channel wizard

For further information about the available welding programs, modied processes,

Match™ functions and the special enhanced arc performance solution, see the wire

feeder's operating manual or the Kemppi website at www.kemppi.com.

Edit channel (Main menu 1/8)

Menu item Value range Description

Select channel

Edit channel 0 - 199 Select which memory channel to edit, create

or delete. The text below the selection shows

whether the channel is empty or not.

New channel (displayed when the selected channel is empty)

Menu item Value range Description

1/2 Create new Create a new memory channel by

selecting the welding curve and

specifying welding functions and

welding parameters. After saving the

curve selection, the welding parameter

setup is opened automatically.

1. Choose process MIG,

1-MIG,

Pulse MIG,

Double pulse

MIG, WiseRoot+,

WiseThin+,

Curve number

list

Select one of the processes for step-by-

step curve selection, or go to the curve

number list to select the welding curve

directly by its number. In the step-by-

step selection the curve list is ltered

by each selection to make the curve

selection easier.

2. Choose group * Select the group of the base material.

3. Choose material * Select the base material.

4. Choose diameter * Select the ller wire diameter.

5. Choose gas * Select the shielding gas type.

Choose curve * Choose the curve from the list ltered by

the process, material, wire diameter and

shielding gas selections.

2/2 Copy from CH… Create a new memory channel by

making a copy from an existing one.

Copy from CH 0 - 199 Select the channel where to make the

copy from.

* The content of the list depends on the available curves and the selections in the

previous steps.