Operation Manual
26
A5 TIG Orbital System 75© Kemppi Oy 2016 1615
OPERATING MANUAL
4.2.3 Tungsten electrode material and ordering
information
Kemppi uses ceriated tungsten to increase electrode life,
arc starting, and stability, and recommends this material
for orbital use.
2% ceriated = no radiation risk
These tungsten electrodes are commonly marked in grey
color.
Tungsten electrodes can be pre-cut and sharpened to
certain lengths with Tungsten electrode sharpening and
cutting devices. See standard length electrode ordering
codes and electrode sharpening and cutting device codes
at table below.
9873531 10 pcs. 1.0 mm diameter, 175 mm long
9873532 10 pcs. 1.6 mm diameter, 175 mm long
9873533 10 pcs. 2.4 mm diameter, 175 mm long
6270001 Ultima – TIG – cut, tungsten electrode
cutting/sharpening machine
6270002 Neutrix, portable, tungsten-electrode
sharpening machine
6270003 Auto Grind, tungsten-electrode
automated grinder.
Recommended tungsten electrode lengths of dierent
tube sizes.