Operation Manual

13
A5 TIG Orbital System 75© Kemppi Oy 2016 1615
OPERATING MANUAL
3.3 Electrode sharpeners
NEUTRIX Ultima – TIG – cut
Use sharpener to sharpen the electrodes, to cut them to
correct length, and to help gather and recycle welding
dust.
Desktop model (recommended) allows more precise
lengths. It recycles dust into liquid instead of air. You can
also use a hand-held model. You can also use a hand-held
model. Only sharpening is possible with the hand-held
model, not accurately cutting to length.
You can obtain a faster and more uniform grinding result
compared to manual grinding with an optional auto-grind
device.
Tungsten is the most suitable material for welding
electrodes but it is hazardous as waste and when breathed.