User Manual
KEMPER PROFILING AMPLIFIER62
PC/Windows Instructions
• Download and install 7-zip on your PC http://www.7-zip.org/
• Create a backup of your KPA data on your USB-stick (KPA User Manual page 36).
• Remove the USB-stick from your KPA and plug the USB-stick with the backup into your PC.
• Open the USB-Stick using the File Manager on your PC.
• Open the Folder Backups, which contains your KPA backup archives e. g. 2012-07-13 17-27-25.kpabackup.
The archive name indicates the time, when it was created on the KPA.
• Select the latest backup, cut and paste it to your desktop.
• Now right click on the backup archive on your desktop, chose 7-zip, select unpack file.
• A pop-up window will ask you to confirm the path, where the unpacked data should be stored. Press Ok.
• Now you find a normal data folder on your PC desktop with a name like 2012-07-13 17-27-25.
• Double click on this folder.
• Now you see the various folders for rigs and dierent kinds of local presets.
• Double click on the folder Rigs.
• Here you find one file for each rig on your KPA.
• Now you can start your clean-up work and delete rigs, that you don’t need anymore.
• As soon as you are done with your clean-up work, close all folders.
• Now is the right time to store the original backup archive in a safe place on your PC and avoid conflicts
with the new cleaned-up backup archive, which will carry exactly the same filename. Select the original
backup archive on your desktop for example 2012-07-13 17-27-25.kpabackup, cut and paste this into a
folder on your PC, where you store all your KPA-backups. Should you accidentally delete a rig during the
clean-up process, you can always restore this backup and recover all your data.