User Manual
RIG 51
Character Use the “Character” soft knob to select a character
Insert Use the soft button “Insert” to insert a space to the left of the currently selected
character.
Delete The soft button “Delete” clears the currently selected character and closes the gap.
Done When you finished inputting the text, press the soft button “Done” to complete the
procedure.
Snapshots
Back in the RIG page, the soft button “Browse Snapshots” allows you to browse snapshots with the
BROWSE knob.
Snapshots are backups of entire rigs, and are automatically generated for everything that would otherwise
be lost. For instance, a snapshot is created when you store over an existing rig. This way, you can go back
to what you’ve overwritten, at any point in time. You can also take snapshots manually by using the soft
button “Store Snapshot” in the regular play screen.
After pressing “Browse” you can use the soft button “Delete” to delete a selected snapshot, and the soft
button “Load” to load a selected snapshot.
On the next page of the RIG menu, you can determine the location of the volume pedal to be pre-stomps,
post-stomps, pre-eects or post-eects as well as set the range of the pedal.
Pedals
The Kemper Profiling Amplifier will easily work in combination with two expression pedals - one to control
volume, and the second as the Wah pedal that works with the family of Wah eects.