User Manual
STOMP SECTION 35
Hyper Chorus
The Hyper Chorus is probably one of the most complex choruses ever made; it is a six-voice chorus with
up to three delay lines for both the left and right sides. Despite this, it is staggeringly simple to use, as you
only need adjust the “Depth” parameter to achieve a huge, warm sound.
Depth
By adjusting “Depth”, you change the amount of detune and fatness that the chorus adds to the signal -
everything else is perfectly adjusted to give you the lushest chorus sound with no further tweaking neces-
sary. You can even choose very small amounts of detune without the typical comb filter eect of a regular
chorus. When you bring “Depth” down to zero, the chorus eect completely goes away, even with the
“Mix” parameter at full position.
Amount
If the full sound becomes too complex, you have the option to continuously reduce the amount of delay
lines. You can smoothly fade the numbers of delay lines from one to three on each stereo side. So yes,
even 1.5 choruses are possible: this simply means one chorus is at full volume, the other is at half.
X-Over
Increase the value of the “X-Over” parameter to prevent the chorus eect from modulating the lower fre-
quencies of the input signal.
Air Chorus
The Air Chorus is a subtle kind of chorus, as it doesn’t mix the direct sound with the processed signal; in-
stead, it modulates the pitch of the left and right sides of the signal independently from each other. The