User Manual
KEMPER PROFILING AMPLIFIER16
This way you can run profiles of dierent amp models by the same monitor cabinet, even if your cabinet
does not match perfectly to certain amp models.
Of course we cannot anticipate the exact sound of the speaker cabinet you use. Some little finetuning on
the global Monitor Equalizer will help you to create the perfect “amp in the room” sound.
You can use tube power amps, too. If you own a tube guitar amp with a send and return jack on the back,
you can connect the Monitor Output of the Profiler straight to the return jack of your tube amp and thus
bypassing the pre amp section. This guarantees for the least colouration of the sound. Still your tube pow-
er amp will additionally colour the sound. You are running a tube power amp and a virtual tube power amp
in a row. You might need some larger corrections of the global Monitor Equalizer to make it sound right.
If you own a matching tube amp and cabinet and you want to replace the preamp by the Profiler but still
use the cabinet, you might get better results by profiling the preamp (tap it on the eect send of your
tube amp) and play the profile to the eect return of the tube amp.