User Manual

CONFIGURE YOUR SYSTEM PREFERENCES 33

Conﬁgure your system preferences

System button

Press SYSTEM to access the “global settings” pages. Global settings remain unaected when you change

to another rig. Parameters in the system menu include “Pedal Settings”, “LED Intensities”, “Display Con-

trast”, “Time And Date”, among others.

Module button behavior

You have learned that the module buttons have two purposes:

• Switch a module on or o (press button brieﬂy).

• Bringing a module into focus (hold the button for a little while).

If you feel uncomfortable with holding the module buttons to put an eect into the focus, you can change

the behavior of the buttons in the system menu by activating “Direct Edit”. In this mode a short push of a

module button puts the module into focus, just as the RIG or SYSTEM buttons do.

There are still two ways to switch a module on and o: either bring the eect into focus and use the ON

button, or hold the ON button while pressing the module buttons that you want to switch. This procedure

will work in any situation. Even while editing one eect, you can switch other eects on and o by holding

the ON button while you press the respective module buttons.