User Manual
BACK PANEL OVERVIEW 23
In this case, the RETURN works in combination with the ALTERNATIVE INPUT to achieve a stereo loop re-
turn.
Power connector
(5)
Connect this to your wall outlet using the supplied power cable. The internal, universal power supply ac-
cepts 100 - 240V AC via the usual IEC inlet.
USB
(6)
Use the USB host port to connect USB sticks for backups and OS updates. See “Updates, backup and
sharing sounds” for details.
Pedals and switches
(7)
You can connect a variety of pedals and switches to control several functions. Pedal #2 is the volume ped-
al by default. When you connect a foot switch, use the parameters in System mode to assign that pedal to
perform a variety of functions. Pedal #1 defaults to the control of Wah-type eects.
MIDI
(8)
Use these ports to connect the KPA to MIDI equipment. You can send MIDI program changes to switch be-
tween rigs.