User Manual

KEMPER PROFILING AMPLIFIER12

Stomps

The ﬁrst section, labeled “STOMPS”, is for your stomp box eects. This section oers four stomp box slots

which are represented by the four buttons labeled A, B, C, and D. Here you can place the built-in stomp

eects in any order and conﬁguration you’d like. These eects are applied before the signal reaches the

STACK section.

 Stomp LED color coding

You’ll notice that the stomp LEDs aren’t simply lit green or not, but have many dierent colors. That’s be-

cause these LEDs use color to help you identify which kind of algorithm is being used for each stomp.

Stomp algorithms are color coded like this:

Distortion Red

Wah Orange

Chorus Blue

Phaser & Flanger Purple

Compressor Cyan

EQ Yellow

Delay Green

Eect Loop White

You can change the algorithm for a stomp that is shown in the display by rotating the TYPE knob above

the left side of the display to scroll through the available algorithms. The BROWSE knob above the right

side of the display can be used to select items from lists of “local presets” that are available for every

stomp. Local presets are settings for a speciﬁc type of module (stomps and eects), stored independent

from the rig itself.